Increase the allocated buffer size to fit larger packets.
Given that jumboframes can commonly be up to 9000 bytes the closest suitable
value seems to be 16 KiB.

Tested by running qemu towards a Linux L2TPv3 endpoint and pushing
jumboframe traffic through the interfaces.

Signed-off-by: Christian Svensson <blue@cmd.nu>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Currently, VMXNET3_MAX_MTU itself (being 9000) is not considered a
valid value for the MTU, but a guest running ESXi 7.0 might try to
set it and fail the assert [0].

In the Linux kernel, dev->max_mtu itself is a valid value for the MTU
and for the vmxnet3 driver it's 9000, so a guest running Linux will
also fail the assert when trying to set an MTU of 9000.

VMXNET3_MAX_MTU and s->mtu don't seem to be used in relation to buffer
allocations/accesses, so allowing the upper limit itself as a value
should be fine.

[0]: https://forum.proxmox.com/threads/114011/



Fixes: d05dcd94 ("net: vmxnet3: validate configuration values during activate (CVE-2021-20203)")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

This patch replaces hw_error to guest error log for [read|write]b
accesses when mode_16bit is enabled. This avoids aborting qemu.

Fixes: 1248f8d4 ("hw/lan9118: Add basic 16-bit mode support.")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1433


Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Just because a NIC model is compiled into the QEMU binary does not
necessary mean that it can be used with each and every machine.
So let's rather talk about "available" models instead of "supported"
models, just to avoid confusion.

Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Running QEMU with "-nic help" used to work in QEMU 5.2 and earlier versions
(it showed the available netdev backends), but this feature got broken during
some refactoring in version 6.0. Let's restore the old behavior, and while
we're at it, let's also print the available NIC models here now since this
option can be used to configure both, netdev backend and model in one go.

Fixes: ad6f932f ("net: do not exit on "netdev_add help" monitor command")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

The code that collects the available NIC models is not really specific
to PCI anymore and will be required in the next patch, too, so let's
move this into a new separate function in net.c instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>

Migration Pull request

This pull request contains:

* Add qemu_file_get_to_fd() a.k.a. make vfio happy(Avihai)
* migration/block is now DPRINTF() free zone (Philippe)
* remove res_compat and improve docs (me)

Please apply.

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmPtOxgACgkQ9IfvGFhy
# 1yM+8w/+Nrm40o8B+0M1X/2O8SPaXE0Oxll5qk5AgfC+2Ef/n5661ZzOM1xQcqzv
# CN3bj3g7dKN05nGhqW5ZFrEZliJCGksx2FBKMq9H6R5YBSMo/+GHT4ugPqsujudl
# RBafIHzp4h4nTh/4aJ4Kr2Vn/bVQzGVyv5c6yUdUhKhE1QfCLu9AMC5vN1hfWxBz
# IQBvMkLNXXhWOTdkVAElVlFOM6GZzWb1UYDkBaQHjjw/dN0MdCFFj7tIaBIyU2Eb
# KyQCoYeJjjWrljsrfzfCucrW+mbVGmCe1TiCEnaAmmgzOI0NwARmUcdYdCyZ4Nhh
# flNjpqQB6H4/ekI0mus2YPMPEkHyVgBMuF8fHV3YDwxcQ25U39RLymVfAoKPNg88
# S1EcQ9h2QVqdML7bR9vTmPOZKk5vD25H7B8LQIJpT8PHVg3ZzzRaOIR8UHmmFXx/
# PSL1rGfPcCLJ3P1XlVjwBApebMHyid9c+Sohda9L9HPer0jlB+mGQUEV8J67DJiT
# xlffFgJmYu3+AJu9BoqrG0AUW6zA78jSs4Tbp78qbIVA4uzGkWI9JvROMfG9Qcc7
# vruuL0sUXHVUhzW2F+0M+b1rVhaHHQYvFo3mIqdHrd5mGicdgh1HUbaJuEJxeJnh
# oFt6SZbIx3N/pllcvMsxQa+rFI/po+FEkRwIF02SzTRWYHB0qos=
# =KpKO
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Feb 2023 20:05:44 GMT
# gpg:                using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg:                 aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* tag 'migration-20230215-pull-request' of https://gitlab.com/juan.quintela/qemu

:
  migration: Rename res_{postcopy,precopy}_only
  migration: Remove unused res_compatible
  migration: In case of postcopy, the memory ends in res_postcopy_only
  migration/block: Convert remaining DPRINTF() debug macro to trace events
  migration/qemu-file: Add qemu_file_get_to_fd()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

* block/iscsi: fix double-free on BUSY or similar statuses
* catch [accel] entry without accelerator
* target/i386: various fixes for BMI and ADX instructions
* make the contents of meson-buildoptions.sh stable

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPpDTcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroODWAgAhWi0XSBe91+34ahQqx6JoLStNX9e
# xy1Cm/5LPDrDquD/4T6gnzb1Min/X2AsVu9c+VIbuHbL/rFc7aNIEL6c7KzwSFLs
# vEDF7tSnlIMK0ClDsDYBz7HUIgBgqE2crAJmTJus2Cqd+Ef5bMxhQi5Imrk6qtmO
# HRdVYEGasJ7CO50oUB91AMrNInWQw0qBnBOB8TnwTLTcvE1txa+xnZuZgQA2HrGX
# OweLdKRcYPvRYvBB3wLMbwqEKbD1eYbdbNt7T2KkuVQpYcgfoCpayHIIMroD+hvu
# BImmG9wWieDKH4Brs765gH6/3VF5UZKbgDQo9Wz+W/5QqnqRSsOYBiMkmA==
# =G3PN
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 12 Feb 2023 16:00:55 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu

:
  libqtest: ensure waitpid() is only called once
  libqtest: split qtest_spawn_qemu function
  target/i386: fix ADOX followed by ADCX
  target/i386: Fix C flag for BLSI, BLSMSK, BLSR
  target/i386: Fix BEXTR instruction
  tests/tcg/i386: Introduce and use reg_t consistently
  vl: catch [accel] entry without accelerator
  block/iscsi: fix double-free on BUSY or similar statuses
  remove unnecessary extern "C" blocks
  build: make meson-buildoptions.sh stable

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Once that res_compatible is removed, they don't make sense anymore.
We remove the _only preffix.  And to make things clearer we rename
them to must_precopy and can_postcopy.

Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Nothing assigns to it after previous commit.

Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>

So remove last assignation of res_compatible.

Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>

 * Document 'password-secret' option for -iscsi
 * Deprecate iSCSI 'password' in favour of 'password-secret'
 * Remove deprecated 'password' option for SPICE
 * Fix handling of cached read buffers with TLS

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmPtGoUACgkQvobrtBUQ
# T99RsA/7BQqQCyZcpTxYXYnGace4qnVx/VQLX7gESjnbsXlA0qUAtxepg2YdsU3W
# GxyZHflP48TesSAsxsA9sBwoFaJZvsq+fZnq62clNNiZTIRynSi65KVUdbqQ/a3F
# 3A9XZlqLzXJMPpwyowzcjMCx+/4+cIr9DA0hKUzQJtNder1I17ySXFGGsO98iM24
# KR/Pulk2NogWLez1Tr7qF01+OK8/cBPpD/QEHzKXsyVcbgnFLFnBIpbpLtlK4BEb
# g6csk665kbWZXud25YXdyG9pUPOrNM4l+7fQcDhjy3IoS2P6/bCTp1jsn3txTbEj
# yTKFJEEM18UWNQCvn4wyHiRCK6+KrFigocdj0jdsyG5DtNUTxqNkdscJa8V/d0hR
# 4y56Z33yK5JQIPaHE28f5vy/w2014hUoqpoYHt4JOeUuUJq9tvMqY6TCThc3ZvvP
# 08DF/0MwIj0NzP5hiEtNxUwFNjwmVRZCSzmNX+22SXOlICwZeQpejwtpEz8YMgDo
# S4vEUjhcNYXoTkL6qZFfBuwn1Gkqqg1DRx8amh3WTB7JDiFA9YwefmBiblAqEK0D
# AG1vPo53uHFytoYqMtsEI/JVE7wfZCBHGBXz2euOOKzUqWS0OGL0h71s5D0yDY+U
# /8YBy86qj7Vm7QuUz+Z2OaWH+miXYy8/kMjdfEcGgqbORReZWrI=
# =sAEk
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Feb 2023 17:46:45 GMT
# gpg:                using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* tag 'misc-next-pull-request' of https://gitlab.com/berrange/qemu

:
  ui: remove deprecated 'password' option for SPICE
  block: deprecate iSCSI 'password' in favour of 'password-secret'
  block: mention 'password-secret' option for -iscsi
  io/channel-tls: fix handling of bigger read buffers
  crypto: TLS: introduce `check_pending`

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Finish the conversion from commit fe80c024
("migration: using trace_ to replace DPRINTF").

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Add new function qemu_file_get_to_fd() that allows reading data from
QEMUFile and writing it straight into a given fd.

This will be used later in VFIO migration code.

Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

This has been replaced by the 'password-secret' option,
which references a 'secret' object instance.

Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

Support for referencing secret objects was added in

  commit b189346e
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Thu Jan 21 14:19:21 2016 +0000

    iscsi: add support for getting CHAP password via QCryptoSecret API

The existing 'password' option is overdue for deprecation and
subsequent removal.

Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

The 'password-secret' option was added

  commit b189346e
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Thu Jan 21 14:19:21 2016 +0000

    iscsi: add support for getting CHAP password via QCryptoSecret API

but was not mentioned in the command line docs

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

Since the TLS backend can read more data from the underlying QIOChannel
we introduce a minimal child GSource to notify if we still have more
data available to be read.

Signed-off-by: Antoine Damhet <antoine.damhet@shadow.tech>
Signed-off-by: Charles Frey <charles.frey@shadow.tech>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

The new `qcrypto_tls_session_check_pending` function allows the caller
to know if data have already been consumed from the backend and is
already available.

Signed-off-by: Antoine Damhet <antoine.damhet@shadow.tech>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

* Bump minimum Clang version to 10.0
* Improve the handling of the libdw library
* Deprecate --enable-gprof builds and remove them from CI
* Remove the deprecated "sga" device
* Some header #include clean-ups
* Make qtests more flexible with regards to missing devices
* Some small s390x-related fixes/improvements

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmPra8ARHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbW5zQ/+LRyPlCB9/Zz+40QUNIl9M9pcpjwCno9w
# pWIeOXMftBu8vCa/+o58Y22NzmWq7cFypfsIvjrlCqCIZQx1shez5+bvE/ZSyECd
# vy3I+ybKRSaXgE/ighAifwOR7eOhqLBHyXJkAN5grMx0kuu3oKqXBpyJNqTHjq6o
# VgKTu8+o7Ddb+CuzwGahKzyzTqD7gY+9+Y5Gnlq0DvbNEq9k6tcjQZ8P3MqOmjWJ
# WnBZH9Rrq9itnlcZXMl8xY6w572GLTq+aJbtc/iS3cvNV2WMwTFMj4lJZjuSkzX0
# af2Aw/4e23uKpjnD44cI17XkRSQbUcT756b3KtdHlKHRvKSL+zwjsraimEN6sleO
# Y5ibaFamqvoR7IuOqJ7/cbpBN+P46JU1ryQ17BvAN/HnNSEmkn6FLGtDhyvabIHq
# C69TBb1IX0GApo0txeg0d0nFrSvVACpX+/D1bRedmI5SD3EukTcBr6UELiBqXqLH
# O75tWQydMwxuP8ay7/zU4g4PApif/RBbR41pw+oVsQNIx1p5QilNy069m/V2nT3k
# gMciT2+U8bIu3GUULuW0zPuD/o88XJk+ocjFHIE8BbwCx41iL6jKhM+xHwUeIkv4
# dZT+8BlbBzNZlSAgpMu9wt0T2hyHrKYtmLxvrVi/qq6ZyO7ZUVBfOGfqAd3QtvQX
# hIERpFunzFY=
# =GNLD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 14 Feb 2023 11:08:48 GMT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2023-02-14' of https://gitlab.com/thuth/qemu

: (22 commits)
  hw/s390x/event-facility: Replace DO_UPCAST(SCLPEvent) by SCLP_EVENT()
  tests/tcg/s390x: Use -nostdlib for softmmu tests
  tests/qtest: Don't build virtio-serial-test.c if device not present
  tests/qtest: bios-tables-test: Skip if missing configs
  tests/qemu-iotests: Require virtio-scsi-pci
  tests/qtest: Do not include hexloader-test if loader device is not present
  tests/qtest: Check for devices in bios-tables-test
  tests/qtest: drive_del-test: Skip tests that require missing devices
  tests/qtest: Skip unplug tests that use missing devices
  test/qtest: Fix coding style in device-plug-test.c
  tests/qtest: hd-geo-test: Check for missing devices
  tests/qtest: Add dependence on PCIE_PORT for virtio-net-failover.c
  tests/qtest: Do not run lsi53c895a test if device is not present
  tests/qtest: Skip PXE tests for missing devices
  Do not include "qemu/error-report.h" in headers that do not need it
  include/hw: Do not include "hw/registerfields.h" in headers that don't need it
  hw/misc/sga: Remove the deprecated "sga" device
  tests/qtest/npcm7xx_pwm-test: Be less verbose unless V=2
  build: deprecate --enable-gprof builds and remove from CI
  meson: Disable libdw for static builds by default
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Use the SCLP_EVENT() QOM type-checking macro to avoid DO_UPCAST().

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230212225144.58660-16-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The code currently uses -nostartfiles, but this does not prevent
linking with libc. On Fedora there is no cross-libc, so the linking
step fails.

Fix by using the more comprehensive -nostdlib (that's also what
probe_target_compiler() checks for as well).

Fixes: 503e549e ("tests/tcg/s390x: Test unaligned accesses to lowcore")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230131182057.2261614-1-iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The virtconsole device might not be present in the QEMU build that is
being tested.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230213210738.9719-5-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

If we build with --without-default-devices, CONFIG_HPET and
CONFIG_PARALLEL are set to N, which makes the respective devices go
missing from acpi tables.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-13-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Check that virtio-scsi-pci is present in the QEMU build before running
the tests.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-12-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-11-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Do not include tests that require devices that are not available in
the QEMU build.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230208194700.11035-10-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-9-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-8-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

We should not mix declarations and statements in QEMU code.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-7-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Don't include tests that require devices not available in the QEMU
binary.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230208194700.11035-6-farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>

This test depends on the presence of the pcie-root-port device. Add a
build time dependency.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-4-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The tests are built once for all the targets, so as long as one QEMU
binary is built with CONFIG_LSI_SCSI_PCI=y, this test will
run. However some binaries might not include the device. So check this
again in runtime.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-3-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Check if the devices we're trying to add are present in the QEMU
binary. They could have been removed from the build via Kconfig or the
--without-default-devices option.

Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230208194700.11035-2-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Include it in the .c files instead that use the error reporting
functions.

Message-Id: <20230210111931.1115489-1-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Include "hw/registerfields.h" in the .c files instead (if needed).

Message-Id: <20230210112315.1116966-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.

Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

The npcm7xx_pwm-test produces a lot of output at V=1, which
means that on our CI tests the log files exceed the gitlab
500KB limit. Suppress the messages about exactly what is
being tested unless at V=2 and above.

This follows the pattern we use with qom-test.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230209135047.1753081-1-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

As gprof relies on instrumentation you rarely get useful data compared
to a real optimised build. Lets deprecate the build option and
simplify the CI configuration as a result.

Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1338


Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230131094224.861621-1-alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

Static QEMU build fails on Debian Bullseye:

    /usr/bin/ld: /usr/lib/x86_64-linux-gnu/libdw.a(debuginfod-client.o): in function `__libdwfl_debuginfod_init':
    (.text.startup+0x17): undefined reference to `dlopen'

The reason is that pkg-config does not suggest -ldl for libdw, and
adding --extra-ldflags="-ldl" resolves the issue. However, static
linking with libdw is an unclear topic:

* Linux perf does it.
* Debian's libdw-dev description says:

      Only link to the static version for special cases and when you
      don't need anything from the ebl backends.

* As the error message above indicates, -ldl is also needed for
  debuginfod support.

The functionality provided by libdw is needed for analyzing performance
of JITed code, which is mostly useful to developers and researchers.
Therefore, in order to avoid unpleasant surprises for people who don't
need this, simply disable libdw for static builds by default. It can
still be enabled explicitly if needed.

Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230210005208.438142-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>