We already had the 32-bit versions for a 32-bit host; expand this
to 64-bit hosts as well.  The 64-bit opcodes are new.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We already had mulu2_i32 for a 32-bit host; expand this to 64-bit
hosts as well.  The muls2_i32 and the 64-bit opcodes are new.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

These were already present in tcg-target.c.inc,
but not in the interpreter.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

When this opcode is not available in the backend, tcg middle-end
will expand this as a series of 5 opcodes.  So implementing this
saves bytecode space.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

This operation is critical to staying within the interpretation
loop longer, which avoids the overhead of setup and teardown for
many TBs.

The check in tcg_prologue_init is disabled because TCI does
want to use NULL to indicate exit, as opposed to branching to
a real epilogue.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

This removes all of the problems with unaligned accesses
to the bytecode stream.

With an 8-bit opcode at the bottom, we have 24 bits remaining,
which are generally split into 6 4-bit slots.  This fits well
with the maximum length opcodes, e.g. INDEX_op_add2_i32, which
have 6 register operands.

We have, in previous patches, rearranged things such that there
are no operations with a label which have more than one other
operand.  Which leaves us with a 20-bit field in which to encode
a label, giving us a maximum TB size of 512k -- easily large.

Change the INDEX_op_tci_movi_{i32,i64} opcodes to tci_mov[il].
The former puts the immediate in the upper 20 bits of the insn,
like we do for the label displacement.  The later uses a label
to reference an entry in the constant pool.  Thus, in the worst
case we still have a single memory reference for any constant,
but now the constants are out-of-line of the bytecode and can
be shared between different moves saving space.

Change INDEX_op_call to use a label to reference a pair of
pointers in the constant pool.  This removes the only slightly
dodgy link with the layout of struct TCGHelperInfo.

The re-encode cannot be done in pieces.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Inline it into its one caller, tci_write_reg64.
Drop the asserts that are redundant with tcg_read_r.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The encoding planned for tci does not have enough room for
brcond2, with 4 registers and a condition as input as well
as the label.  Resolve the condition into TCG_REG_TMP, and
relax brcond to one register plus a label, considering the
condition to always be reg != 0.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We're about to adjust the offset range on host memory ops,
and the format of branches.  Both will require a temporary.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

This requires adjusting where arguments are stored.
Place them on the stack at left-aligned positions.
Adjust the stack frame to be at entirely positive offsets.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

As the only call-clobbered regs for TCI, these should
receive the least priority.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

The current setting is much too pessimistic.  Indicating only
the one or two registers that are actually assigned after a
call should avoid unnecessary movement between the register
array and the stack array.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Add libffi as a build requirement for TCI.
Add libffi to the dockerfiles to satisfy that requirement.

Construct an ffi_cif structure for each unique typemask.
Record the result in a separate hash table for later lookup;
this allows helper_table to stay const.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

This will give us both flags and typemask for use later.

We also fix a dumping bug, wherein calls generated for plugins
fail tcg_find_helper and print (null) instead of either a name
or the raw function pointer.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

As noted by qemu-plugins.h, plugins can neither read nor write
guest registers.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

As noted by qemu-plugins.h, enum qemu_plugin_cb_flags is
currently unused -- plugins can neither read nor write
guest registers.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Let the compiler decide on inlining.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We're going to change how to look up the call flags from a TCGop,
so extract it as a helper.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

We will shortly be interested in distinguishing pointers
from integers in the helper's declaration, as well as a
true void return.  We currently have two parallel 1 bit
fields; merge them and expand to a 3 bit field.

Our current maximum is 7 helper arguments, plus the return
makes 8 * 3 = 24 bits used within the uint32_t typemask.

Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

audio: bugfix collection.

# gpg: Signature made Thu 17 Jun 2021 13:40:56 BST
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20210617-pull-request:
  coreaudio: Fix output stream format settings
  audio: Fix format specifications of debug logs
  hw/audio/sb16: Avoid assertion by restricting I/O sampling rate range
  jackaudio: avoid that the client name contains the word (NULL)
  audio: move code to audio/audio.c
  paaudio: remove unused stream flags
  alsaaudio: remove #ifdef DEBUG to avoid bit rot

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

* avoid deprecation warnings for SASL on macOS 10.11 or newer
* fix -readconfig when config blocks have an id (like [chardev "qmp"])
* Error* initialization fixes
* Improvements to ESP emulation (Mark)
* Allow creating noreserve memory backends (David)
* Improvements to query-memdev (David)
* Bump compiler to C11 (Richard)
* First round of SVM fixes from GSoC project (Lara)

# gpg: Signature made Wed 16 Jun 2021 16:37:49 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (45 commits)
  configure: Remove probe for _Static_assert
  qemu/compiler: Remove QEMU_GENERIC
  include/qemu/lockable: Use _Generic instead of QEMU_GENERIC
  util: Use unique type for QemuRecMutex in thread-posix.h
  util: Pass file+line to qemu_rec_mutex_unlock_impl
  util: Use real functions for thread-posix QemuRecMutex
  softfloat: Use _Generic instead of QEMU_GENERIC
  configure: Use -std=gnu11
  target/i386: Added Intercept CR0 writes check
  target/i386: Added consistency checks for CR0
  target/i386: Added consistency checks for VMRUN intercept and ASID
  target/i386: Refactored intercept checks into cpu_svm_has_intercept
  configure: map x32 to cpu_family x86_64 for meson
  hmp: Print "reserve" property of memory backends with "info memdev"
  qmp: Include "reserve" property of memory backends
  hmp: Print "share" property of memory backends with "info memdev"
  qmp: Include "share" property of memory backends
  qmp: Clarify memory backend properties returned via query-memdev
  hostmem: Wire up RAM_NORESERVE via "reserve" property
  util/mmap-alloc: Support RAM_NORESERVE via MAP_NORESERVE under Linux
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Before commit 7d6948cd, it was coded to
retrieve the initial output stream format settings, modify the frame
rate, and set again. However, I removed a frame rate modification code by
mistake in the commit. It also assumes the initial output stream format
is consistent with what QEMU expects, but that expectation is not in the
code, which makes it harder to understand and will lead to breakage if
the initial settings change.

This change explicitly sets all of the output stream settings to solve
these problems.

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210616141721.54091-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20210616141411.53892-1-akihiko.odaki@gmail.com
Message-Id: <20210616141411.53892-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

While the SB16 seems to work up to 48000 Hz, the "Sound Blaster Series
Hardware Programming Guide" limit the sampling range from 4000 Hz to
44100 Hz (Section 3-9, 3-10: Digitized Sound I/O Programming, tables
3-2 and 3-3).

Later, section 6-15 (DSP Commands) is more specific regarding the 41h /
42h registers (Set digitized sound output sampling rate):

  Valid sampling rates range from 5000 to 45000 Hz inclusive.

There is no comment regarding error handling if the register is filled
with an out-of-range value.  (See also section 3-28 "8-bit or 16-bit
Auto-initialize Transfer"). Assume limits are enforced in hardware.

This fixes triggering an assertion in audio_calloc():

  #1 abort
  #2 audio_bug audio/audio.c:119:9
  #3 audio_calloc audio/audio.c:154:9
  #4 audio_pcm_sw_alloc_resources_out audio/audio_template.h:116:15
  #5 audio_pcm_sw_init_out audio/audio_template.h:175:11
  #6 audio_pcm_create_voice_pair_out audio/audio_template.h:410:9
  #7 AUD_open_out audio/audio_template.h:503:14
  #8 continue_dma8 hw/audio/sb16.c:216:20
  #9 dma_cmd8 hw/audio/sb16.c:276:5
  #10 command hw/audio/sb16.c:0
  #11 dsp_write hw/audio/sb16.c:949:13
  #12 portio_write softmmu/ioport.c:205:13
  #13 memory_region_write_accessor softmmu/memory.c:491:5
  #14 access_with_adjusted_size softmmu/memory.c:552:18
  #15 memory_region_dispatch_write softmmu/memory.c:0:13
  #16 flatview_write_continue softmmu/physmem.c:2759:23
  #17 flatview_write softmmu/physmem.c:2799:14
  #18 address_space_write softmmu/physmem.c:2891:18
  #19 cpu_outw softmmu/ioport.c:70:5

[*] http://www.baudline.com/solutions/full_duplex/sb16_pci/index.html

OSS-Fuzz Report: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=29174

Fixes: 85571bc7 ("audio merge (malc)")
Buglink: https://bugs.launchpad.net/bugs/1910603


Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210616104349.2398060-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Currently with jackaudio client name and qemu guest name unset,
the JACK client names are out-(NULL) and in-(NULL). These names
are user visible in the patch bay. Replace the function call to
qemu_get_vm_name() with a call to audio_application_name() which
replaces NULL with "qemu" to have more descriptive names.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Move the code to generate the pa_context_new() application name
argument to a function in audio/audio.c. The new function
audio_application_name() will also be used in the jackaudio
backend.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

In current code there are no calls to pa_stream_get_latency()
or pa_stream_get_time() to receive latency or time information.

Remove the flags PA_STREAM_INTERPOLATE_TIMING and
PA_STREAM_AUTO_TIMING_UPDATE which instruct PulseAudio to
calculate this information in regular intervals.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Merge the #ifdef DEBUG code with the if statement a few lines
above to avoid bit rot.

Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210517194604.2545-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

Change to -std=gnu11.
Replace QEMU_GENERIC with _Generic.
Remove configure detect of _Static_assert.

# gpg: Signature made Wed 16 Jun 2021 02:32:32 BST
# gpg:                using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg:                issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-c11-20210615:
  configure: Remove probe for _Static_assert
  qemu/compiler: Remove QEMU_GENERIC
  include/qemu/lockable: Use _Generic instead of QEMU_GENERIC
  util: Use unique type for QemuRecMutex in thread-posix.h
  util: Pass file+line to qemu_rec_mutex_unlock_impl
  util: Use real functions for thread-posix QemuRecMutex
  softfloat: Use _Generic instead of QEMU_GENERIC
  configure: Use -std=gnu11

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * hw/intc/arm_gicv3_cpuif: Tolerate spurious EOIR writes
 * handle some UNALLOCATED decode cases correctly rather
   than asserting
 * hw: virt: consider hw_compat_6_0
 * hw/arm: add quanta-gbs-bmc machine
 * hw/intc/armv7m_nvic: Remove stale comment
 * target/arm: Fix mte page crossing test
 * hw/arm: quanta-q71l add pca954x muxes
 * target/arm: First few parts of MVE support

# gpg: Signature made Wed 16 Jun 2021 14:34:49 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210616: (25 commits)
  include/qemu/int128.h: Add function to create Int128 from int64_t
  bitops.h: Provide hswap32(), hswap64(), wswap64() swapping operations
  target/arm: Move expand_pred_b() data to vec_helper.c
  target/arm: Add framework for MVE decode
  target/arm: Implement MVE LETP insn
  target/arm: Implement MVE DLSTP
  target/arm: Implement MVE WLSTP insn
  target/arm: Implement MVE LCTP
  target/arm: Let vfp_access_check() handle late NOCP checks
  target/arm: Add handling for PSR.ECI/ICI
  target/arm: Handle VPR semantics in existing code
  target/arm: Enable FPSCR.QC bit for MVE
  target/arm: Provide and use H8 and H1_8 macros
  hw/arm: quanta-q71l add pca954x muxes
  hw/arm: gsj add pca9548
  hw/arm: gsj add i2c comments
  target/arm: Fix mte page crossing test
  hw/intc/armv7m_nvic: Remove stale comment
  hw/arm: quanta-gbs-bmc add i2c comments
  hw/arm: add quanta-gbs-bmc machine
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

int128_make64() creates an Int128 from an unsigned 64 bit value; add
a function int128_makes64() creating an Int128 from a signed 64 bit
value.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210614151007.4545-34-peter.maydell@linaro.org

Currently the ARM SVE helper code defines locally some utility
functions for swapping 16-bit halfwords within 32-bit or 64-bit
values and for swapping 32-bit words within 64-bit values,
parallel to the byte-swapping bswap16/32/64 functions.

We want these also for the ARM MVE code, and they're potentially
generally useful for other targets, so move them to bitops.h.
(We don't put them in bswap.h with the bswap* functions because
they are implemented in terms of the rotate operations also
defined in bitops.h, and including bitops.h from bswap.h seems
better avoided.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210614151007.4545-17-peter.maydell@linaro.org

For MVE, we want to re-use the large data table from expand_pred_b().
Move the data table to vec_helper.c so it is no longer in an SVE
specific source file.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-14-peter.maydell@linaro.org

Add the framework for decoding MVE insns, with the necessary new
files and the meson.build rules, but no actual content yet.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-11-peter.maydell@linaro.org

Implement the MVE LETP insn.  This is like the existing LE loop-end
insn, but it must perform an FPU-enabled check, and on loop-exit it
resets LTPSIZE to 4.

To accommodate the requirement to do something on loop-exit, we drop
the use of condlabel and instead manage both the TB exits manually,
in the same way we already do in trans_WLS().

The other MVE-specific change to the LE insn is that we must raise an
INVSTATE UsageFault insn if LTPSIZE is not 4.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-10-peter.maydell@linaro.org

Implement the MVE DLSTP insn; this is like the existing DLS
insn, except that it must do an FPU access check and it
sets LTPSIZE to the value specified in the insn.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-9-peter.maydell@linaro.org

Implement the MVE WLSTP insn; this is like the existing WLS insn,
except that it specifies a size value which is used to set
FPSCR.LTPSIZE.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210614151007.4545-8-peter.maydell@linaro.org