Commits · 04ea4d3cfd0a21b248ece8eb7a9436a3d9898dd8 · Anton / libtcg

Jun 08, 2021

hmp: Add "calc_dirty_rate" and "info dirty_rate" cmds · a4a571d9

Peter Xu authored 3 years ago

These two commands are missing when adding the QMP sister commands.
Add them, so developers can play with them easier.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <4cc0039fc3ad6145136770cf3b0f056c09a2910b.1623027729.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

a4a571d9

Jun 03, 2021

monitor: removed cpustats command · de3036ac

Bruno Larsen (billionai) authored 3 years ago


Since ppc was the last architecture to collect these statistics and
it is currently phasing this collection out, the command that would query
this information is being removed.

Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-5-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

de3036ac

Mar 18, 2021

migrate: remove QMP/HMP commands for speed, downtime and cache size · cbde7be9

Daniel P. Berrangé authored 4 years ago

The generic 'migrate_set_parameters' command handle all types of param.

Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>

cbde7be9

Oct 06, 2020

replay: introduce info hmp/qmp command · e3b09ad2

Pavel Dovgaluk authored 4 years ago


This patch introduces 'info replay' monitor command and
corresponding qmp request.
These commands request the current record/replay mode, replay log file
name, and the instruction count (number of recorded/replayed
instructions).  The instruction count can be used with the
replay_seek/replay_break commands added in the next two patches.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <160174520026.12451.13112161947433306561.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

e3b09ad2

Jun 10, 2020

memory: Make 'info mtree' not display disabled regions by default · 2261d393

Philippe Mathieu-Daudé authored 4 years ago

We might have many disabled memory regions, making the 'info mtree'
output too verbose to be useful.
Remove the disabled regions in the default output, but allow the
monitor user to display them using the '-D' option.

Before:

(qemu) info mtree
memory-region: system
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff
0000000000000000-ffffffffffffffff (prio -1, i/o): pci
00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff
00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c0000-00000000000c3fff [disabled]
00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c0000-00000000000c3fff [disabled]
00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c0000-00000000000c3fff [disabled]
00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c4000-00000000000c7fff [disabled]
00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c4000-00000000000c7fff [disabled]
00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c4000-00000000000c7fff [disabled]
00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000c8000-00000000000cbfff [disabled]
00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000c8000-00000000000cbfff [disabled]
00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000c8000-00000000000cbfff [disabled]
00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff
00000000000cc000-00000000000cffff (prio 1, ram): alias pam-ram @pc.ram 00000000000cc000-00000000000cffff [disabled]
00000000000cc000-00000000000cffff (prio 1, ram): alias pam-pci @pc.ram 00000000000cc000-00000000000cffff [disabled]
00000000000cc000-00000000000cffff (prio 1, ram): alias pam-rom @pc.ram 00000000000cc000-00000000000cffff [disabled]
00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff
00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d0000-00000000000d3fff [disabled]
00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d0000-00000000000d3fff [disabled]
00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d0000-00000000000d3fff [disabled]
00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff
00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d4000-00000000000d7fff [disabled]
00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d4000-00000000000d7fff [disabled]
00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d4000-00000000000d7fff [disabled]
00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff
00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000d8000-00000000000dbfff [disabled]
00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000d8000-00000000000dbfff [disabled]
00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000d8000-00000000000dbfff [disabled]
00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff
00000000000dc000-00000000000dffff (prio 1, ram): alias pam-ram @pc.ram 00000000000dc000-00000000000dffff [disabled]
00000000000dc000-00000000000dffff (prio 1, ram): alias pam-pci @pc.ram 00000000000dc000-00000000000dffff [disabled]
00000000000dc000-00000000000dffff (prio 1, ram): alias pam-rom @pc.ram 00000000000dc000-00000000000dffff [disabled]
00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff
00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e0000-00000000000e3fff [disabled]
00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e0000-00000000000e3fff [disabled]
00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e0000-00000000000e3fff [disabled]
00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff
00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e4000-00000000000e7fff [disabled]
00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e4000-00000000000e7fff [disabled]
00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e4000-00000000000e7fff [disabled]
00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff
00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-ram @pc.ram 00000000000e8000-00000000000ebfff [disabled]
00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-pci @pc.ram 00000000000e8000-00000000000ebfff [disabled]
00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-rom @pc.ram 00000000000e8000-00000000000ebfff [disabled]
00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff
00000000000ec000-00000000000effff (prio 1, ram): alias pam-ram @pc.ram 00000000000ec000-00000000000effff [disabled]
00000000000ec000-00000000000effff (prio 1, ram): alias pam-pci @pc.ram 00000000000ec000-00000000000effff [disabled]
00000000000ec000-00000000000effff (prio 1, ram): alias pam-rom @pc.ram 00000000000ec000-00000000000effff [disabled]
00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff
00000000000f0000-00000000000fffff (prio 1, ram): alias pam-ram @pc.ram 00000000000f0000-00000000000fffff [disabled]
00000000000f0000-00000000000fffff (prio 1, ram): alias pam-pci @pc.ram 00000000000f0000-00000000000fffff [disabled]
00000000000f0000-00000000000fffff (prio 1, ram): alias pam-rom @pc.ram 00000000000f0000-00000000000fffff [disabled]
00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff
00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic
00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi

After:

The old behavior is preserved using 'info mtree -D'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

2261d393

Mar 12, 2020

Update comments in .hx files that mention Texinfo · 3c95fdef

Peter Maydell authored 5 years ago


Update the header comments in .hx files that mention STEXI/ETEXI
markup; this is now SRST/ERST as all these files have been
converted to rST.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200306171749.10756-3-peter.maydell@linaro.org

3c95fdef

Mar 06, 2020

*.hx: Remove all the STEXI/ETEXI blocks · 29f9dff7

Peter Maydell authored 5 years ago

We no longer generate texinfo from the hxtool input files,
so delete all the STEXI/ETEXI blocks.

This commit was created using the following Perl one-liner:
perl -i -n -e '$suppress = 1,next if /^STEXI/;$suppress=0,next if /^ETEXI/; print if !$suppress;' *.hx

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

29f9dff7

hmp-commands-info.hx: Add rST documentation fragments · a12e74cc

Peter Maydell authored 5 years ago


Add the rST versions of the documentation fragments.  Once we've
converted fully from Texinfo to rST we can remove the ETEXI
fragments; for the moment we need both.

Note that most of the SRST fragments are 2-space indented so that the
'info foo' documentation entries appear as a sublist under the 'info'
entry in the top level list.

Again, all we need to do to put the documentation in the Sphinx manual
is a one-line hxtool-doc invocation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200228153619.9906-22-peter.maydell@linaro.org

a12e74cc

Sep 17, 2019

riscv: hmp: Add a command to show virtual memory mappings · df42fdd6

Bin Meng authored 5 years ago


This adds 'info mem' command for RISC-V, to show virtual memory
mappings that aids debugging.

Rather than showing every valid PTE, the command compacts the
output by merging all contiguous physical address mappings into
one block and only shows the merged block mapping details.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

df42fdd6

Mar 16, 2019

{hmp, hw/pvrdma}: Expose device internals via monitor interface · f4b2c02a

Yuval Shaia authored 6 years ago


Allow interrogating device internals through HMP interface.
The exposed indicators can be used for troubleshooting by developers or
sysadmin.
There is no need to expose these attributes to a management system (e.x.
libvirt) because (1) most of them are not "device-management' related
info and (2) there is no guarantee the interface is stable.

Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1552300155-25216-6-git-send-email-yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>

f4b2c02a

Aug 23, 2018

hmp-commands-info: add sync-profile · 97bfafe2

Emilio G. Cota authored 7 years ago


The command introduced here is just for developers. This means that:

- the info displayed and the output format could change in the future
- the command is only meant to be used from HMP, not from QMP

Sample output:

(qemu) sync-profile
sync-profile is off
(qemu) info sync-profile
Type               Object  Call site  Wait Time (s)         Count  Average (us)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
(qemu) sync-profile on
(qemu) sync-profile
sync-profile is on
(qemu) info sync-profile 15
Type               Object  Call site                 Wait Time (s)         Count  Average (us)
----------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                    91.38235          2842      32154.24
BQL mutex  0x55a0171b7140  cpus.c:1434                    12.56490          5787       2171.23
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:432        7.75846          2844       2728.01
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870          5.09889          2884       1767.99
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:529        3.46140          3254       1063.74
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:804          0.76333          8655         88.20
BQL mutex  0x55a0171b7140  cpus.c:1466                     0.60893          2941        207.05
BQL mutex  0x55a0171b7140  util/main-loop.c:236            0.00894          6425          1.39
mutex      [           3]  util/qemu-timer.c:520           0.00342         50611          0.07
mutex      [           2]  util/qemu-timer.c:426           0.00254         31336          0.08
mutex      [           3]  util/qemu-timer.c:234           0.00107         19275          0.06
mutex      0x55a0171d9960  vl.c:763                        0.00043          6425          0.07
mutex      0x55a0180d1bb0  monitor.c:458                   0.00015          1603          0.09
mutex      0x55a0180e4c78  chardev/char.c:109              0.00002           217          0.08
mutex      0x55a0180d1bb0  monitor.c:448                   0.00001           162          0.08
----------------------------------------------------------------------------------------------
(qemu) info sync-profile -m 15
Type               Object  Call site                 Wait Time (s)         Count  Average (us)
----------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                    95.11196          3051      31174.03
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:432        7.92108          3052       2595.37
BQL mutex  0x55a0171b7140  cpus.c:1434                    13.38253          6210       2155.00
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870          5.09901          3093       1648.57
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:529        4.21123          3468       1214.31
BQL mutex  0x55a0171b7140  cpus.c:1466                     0.60895          3156        192.95
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:804          0.76337          9282         82.24
BQL mutex  0x55a0171b7140  util/main-loop.c:236            0.00944          6889          1.37
mutex      0x55a01813ce80  tcg/tcg.c:397                   0.00000            24          0.15
mutex      0x55a0180d1bb0  monitor.c:458                   0.00018          1922          0.09
mutex      [           2]  util/qemu-timer.c:426           0.00266         32710          0.08
mutex      0x55a0180e4c78  chardev/char.c:109              0.00002           260          0.08
mutex      0x55a0180d1bb0  monitor.c:448                   0.00001           187          0.08
mutex      0x55a0171d9960  vl.c:763                        0.00047          6889          0.07
mutex      [           3]  util/qemu-timer.c:520           0.00362         53377          0.07
----------------------------------------------------------------------------------------------
(qemu) info sync-profile -m -n 15
Type               Object  Call site                 Wait Time (s)         Count  Average (us)
----------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                   101.39331          3398      29839.12
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:432        7.92112          3399       2330.43
BQL mutex  0x55a0171b7140  cpus.c:1434                    14.28280          6922       2063.39
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870          5.77505          3445       1676.36
BQL mutex  0x55a0171b7140  accel/tcg/cpu-exec.c:529        5.66139          3883       1457.99
BQL mutex  0x55a0171b7140  cpus.c:1466                     0.60901          3519        173.06
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:804          0.76351         10338         73.85
BQL mutex  0x55a0171b7140  util/main-loop.c:236            0.01032          7664          1.35
mutex      0x55a0180e4f08  util/qemu-timer.c:426           0.00041           901          0.45
mutex      0x55a01813ce80  tcg/tcg.c:397                   0.00000            24          0.15
mutex      0x55a0180d1bb0  monitor.c:458                   0.00022          2319          0.09
mutex      0x55a0180e4c78  chardev/char.c:109              0.00003           306          0.08
mutex      0x55a0180e4f08  util/qemu-timer.c:520           0.00068          8565          0.08
mutex      0x55a0180d1bb0  monitor.c:448                   0.00002           215          0.08
mutex      0x55a0180e4f78  util/qemu-timer.c:426           0.00247         34224          0.07
----------------------------------------------------------------------------------------------
(qemu) sync-profile reset
(qemu) info sync-profile -m 2
Type               Object  Call site               Wait Time (s)         Count  Average (us)
--------------------------------------------------------------------------------------------
condvar    0x55a01813ced0  cpus.c:1165                   2.78756            99      28157.12
BQL mutex  0x55a0171b7140  accel/tcg/cputlb.c:870        0.33054           102       3240.55
--------------------------------------------------------------------------------------------
(qemu) sync-profile off
(qemu) sync-profile
sync-profile is off
(qemu) sync-profile reset
(qemu) info sync-profile
Type               Object  Call site  Wait Time (s)         Count  Average (us)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

97bfafe2

Jul 03, 2018

qapi: add conditions to VNC type/commands/events on the schema · 05eb4a25

Marc-André Lureau authored 6 years ago


Add #if defined(CONFIG_VNC) in generated code, and adjust the
qmp/hmp code accordingly.

query-qmp-schema no longer reports the command/events etc as
available when disabled at compile.

Commands made conditional:

* query-vnc, query-vnc-servers, change-vnc-password

  Before the patch, the commands for !CONFIG_VNC are stubs that fail
  like this:

    {"error": {"class": "GenericError",
               "desc": "The feature 'vnc' is not enabled"}}

  Afterwards, they fail like this:

    {"error": {"class": "CommandNotFound",
               "desc": "The command FOO has not been found"}}

  I call that an improvement, because it lets clients distinguish
  between command unavailable (class CommandNotFound) and command failed
  (class GenericError).

Events made conditional:

* VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED

HMP change:

* info vnc

  Will return "unknown command: 'info vnc'" when VNC is compiled
  out (same as error for spice when --disable-spice)

Occurrences of VNC (case insensitive) in the schema that aren't
covered by this change:

* add_client

  Command has other uses, including "socket bases character devices".
  These are unconditional as far as I can tell.

* set_password, expire_password

  In theory, these commands could be used for managing any service's
  password.  In practice, they're used for VNC and SPICE services.
  They're documented for "remote display session" / "remote display
  server".

  The service is selected by argument @protocol.  The code special-cases
  protocol-specific argument checking, then calls a protocol-specific
  function to do the work.  If it fails, the command fails with "Could
  not set password".  It does when the service isn't compiled in (it's a
  stub then).

  We could make these commands conditional on the conjunction of all
  services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)],
  but I doubt it's worthwhile.

* change

  Command has other uses, namely changing media.
  This patch inlines a stub; no functional change.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

05eb4a25

Jun 28, 2018

doc: another fix to "info pic" · 0cda9d87

Peter Xu authored 7 years ago


Something that commit 254316fa ("intc: make HMP 'info irq' and 'info
pic' commands available on all targets", 2016-10-04) forgot to touch up.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171229073104.3810-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

0cda9d87

memory/hmp: Print owners/parents in "info mtree" · fc051ae6

Alexey Kardashevskiy authored 6 years ago


This adds owners/parents (which are the same, just occasionally
owner==NULL) printing for memory regions; a new '-o' flag
enabled new output.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180604032511.6980-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

fc051ae6

Jun 21, 2018

hmp: Add commands for preconfig · 8c7c7ecb

Dr. David Alan Gilbert authored 6 years ago


Allow a bunch of the info commands to be used in preconfig.

version, chardev, name, uuid,memdev, iothreads
  Were enabled in QMP in the previous patch from Igor

status, hotpluggable_cpus
  Was enabled in the original allow-preconfig series

history
  is HMP specific

qom-tree
  Don't have a QMP equivalent

Also enable the qom commands qom-list and qom-set.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180620153947.30834-6-dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Dropped info numa as per Igor's 2018-06-21 review

8c7c7ecb

Mar 13, 2018

sev/i386: hmp: add 'info sev' command · 63036314

Brijesh Singh authored 7 years ago

The command can be used to show the SEV information when memory
encryption is enabled on AMD platform.

Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

63036314

Jan 25, 2018

target/m68k: add HMP command "info tlb" · 2097dca6

Laurent Vivier authored 7 years ago


Dump MMU state and address mappings.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-8-laurent@vivier.eu>

2097dca6

Oct 05, 2017

hmp-commands-info: Change "@findex FOO" to "@findex info FOO" · 1b591700

Markus Armbruster authored 7 years ago


qemu-doc has the monitor commands in the "Function Index".  The "info
FOO" are listed as "FOO" there.  List them as "info FOO" instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

1b591700

hmp-commands-info: Move Texinfo stanzas to conventional place · a9272513

Markus Armbruster authored 7 years ago


A command's STEXI..ETEXI stanza follows the command's initializer.
Two commands got them backwards.  Correct that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

a9272513

hmp-commands-info: Fix "info rocker-FOO" misspellings · c325ccd3

Markus Armbruster authored 7 years ago


Screwed up in commit da76ee76.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20171002134538.23332-2-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

c325ccd3

Sep 21, 2017

memory: Rework "info mtree" to print flat views and dispatch trees · 5e8fd947

Alexey Kardashevskiy authored 7 years ago


This adds a new "-d" switch to "info mtree" to print dispatch tree
internals.

This changes the way "-f" is handled - it prints now flat views and
associated address spaces.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-15-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

5e8fd947

Sep 14, 2017

hmp: introduce 'info memory_size_summary' command · d0f63c1e

Vadim Galitsyn authored 7 years ago


Add 'info memory_size_summary' command which is a sibling
of QMP command query-memory-size-summary. It provides the
following memory information in bytes:

  * base-memory - size of "base" memory specified with command line option -m.

  * plugged-memory - amount of memory that was hot-plugged.
    If target does not have CONFIG_MEM_HOTPLUG enabled, no
    value is reported.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-4-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Fixed up comments from Igor's review

d0f63c1e

Sep 01, 2017

hmp: allow apic-id for "info lapic" · 1bef2284

Yi Wang authored 7 years ago


Add [apic-id] support for hmp command "info lapic", which is
useful when debugging ipi and so on. Current behavior is not
changed when the parameter isn't specified.

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Yun Liu <liu.yunh@zte.com.cn>
Message-Id: <1501049917-4701-3-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>

1bef2284

Jul 14, 2017

s390x/migration: Monitor commands for storage attributes · f860d497

Claudio Imbrenda authored 8 years ago


Add an "info" monitor command to non-destructively inspect the state of
the storage attributes of the guest, and a normal command to toggle
migration mode (useful for debugging).

Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

f860d497

Jul 04, 2017
- monitor: disable "info jit" and "info opcount" if !TCG · f0d14a95
  Paolo Bonzini authored 12 years ago
  
  Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
  f0d14a95
Jun 29, 2017

monitor: Add -a (all) option to info registers · 18f08282

Suraj Jitindar Singh authored 7 years ago


The info registers command in the qemu monitor is used to dump register
values.

Currently this command uses the monitor cpu (which can be set by the
user) as the cpu for whose registers will be dumped. Sometimes it is
useful to see the registers for all cpus and currently this requires
setting the monitor cpu and the re-running the command for each cpu
in the system. I would be nice if there was an easier way to do this.

Add the "-a" option to the info registers command to dump the register
values for all cpus.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>

Message-Id: <20170608054116.17203-1-sjitindarsingh@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

18f08282

May 17, 2017

ramblock: add new hmp command "info ramblock" · be9b23c4

Peter Xu authored 7 years ago


To dump information about ramblocks. It looks like:

(qemu) info ramblock
              Block Name    PSize              Offset               Used              Total
            /objects/mem    2 MiB  0x0000000000000000 0x0000000080000000 0x0000000080000000
                vga.vram    4 KiB  0x0000000080060000 0x0000000001000000 0x0000000001000000
    /rom@etc/acpi/tables    4 KiB  0x00000000810b0000 0x0000000000020000 0x0000000000200000
                 pc.bios    4 KiB  0x0000000080000000 0x0000000000040000 0x0000000000040000
  0000:00:03.0/e1000.rom    4 KiB  0x0000000081070000 0x0000000000040000 0x0000000000040000
                  pc.rom    4 KiB  0x0000000080040000 0x0000000000020000 0x0000000000020000
    0000:00:02.0/vga.rom    4 KiB  0x0000000081060000 0x0000000000010000 0x0000000000010000
   /rom@etc/table-loader    4 KiB  0x00000000812b0000 0x0000000000001000 0x0000000000001000
      /rom@etc/acpi/rsdp    4 KiB  0x00000000812b1000 0x0000000000001000 0x0000000000001000

Ramblock is something hidden internally in QEMU implementation, and this
command should only be used by mostly QEMU developers on RAM stuff. It
is not a command suitable for QMP interface. So only HMP interface is
provided for it.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

be9b23c4

Mar 02, 2017

qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands · 39164c13

Igor Mammedov authored 8 years ago


Add commands to query Virtual Machine Generation ID counter.

QMP command example:
    { "execute": "query-vm-generation-id" }

HMP command example:
    info vm-generation-id

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

39164c13

Jan 27, 2017

memory: hmp: add "-f" for "info mtree" · 57bb40c9

Peter Xu authored 8 years ago


Adding one more option "-f" for "info mtree" to dump the flat views of
all the address spaces.

This will be useful to debug the memory rendering logic, also it'll be
much easier with it to know what memory region is handling what address
range.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1484556005-29701-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

57bb40c9

Oct 04, 2016

intc: make HMP 'info irq' and 'info pic' commands available on all targets · 254316fa

Hervé Poussineau authored 8 years ago


Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-7-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

254316fa

intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider interface · 61b97833

Hervé Poussineau authored 8 years ago


Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1474921408-24710-6-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

61b97833

Sep 19, 2016

monitor: remove mhandler.cmd_new · 2b9e3576

Marc-André Lureau authored 8 years ago


This is no longer necessary now that we aren't using middle mode
anymore.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160912091913.15831-12-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

2b9e3576

Jul 18, 2016

trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing state · 77e2b172

Lluís Vilanova authored 8 years ago


Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

77e2b172

trace: Allow event name pattern in "info trace-events" · bd71211d

Lluís Vilanova authored 8 years ago


Homogenizes the command capabilities with QMP.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

bd71211d

Jun 17, 2016

hmp: Add 'info hotpluggable-cpus' HMP command · d2d8d46f

Bharata B Rao authored 8 years ago


This is the HMP equivalent for QMP query-hotpluggable-cpus.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Fixed problem with printf formats on 32-bit host]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

d2d8d46f

Feb 22, 2016

Dump: add hmp command "info dump" · 4a6b52d6

Peter Xu authored 9 years ago


It will calculate percentage of finished work from completed and
total.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1455772616-8668-11-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

4a6b52d6

Sep 25, 2015

hmp: added io apic dump state · d665d696

Pavel Butsykin authored 9 years ago


Added the hmp command to query io apic state, may be usefull after guest
crashes to understand IRQ routing in guest.

Implementation is only for kvm here. The dump will look like
(qemu) info ioapic
ioapic id=0x00 sel=0x26 (redir[11])
pin 0  0x0000000000010000 dest=0 vec=0   active-hi edge  masked fixed  physical
pin 1  0x0000000000000031 dest=0 vec=49  active-hi edge         fixed  physical
...
pin 23 0x0000000000010000 dest=0 vec=0   active-hi edge  masked fixed  physical
IRR        (none)
Remote IRR (none)

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas FÃ¤rber <afaerber@suse.de>
Message-Id: <1442927901-1084-9-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

d665d696

hmp: added local apic dump state · 1f871d49

Pavel Butsykin authored 9 years ago


Added the hmp command to query local apic registers state, may be
usefull after guest crashes to understand IRQ routing in guest.

(qemu) info lapic
dumping local APIC state for CPU 0

LVT0    0x00010700 active-hi edge  masked                      ExtINT (vec 0)
LVT1    0x00000400 active-hi edge                              NMI
LVTPC   0x00010000 active-hi edge  masked                      Fixed  (vec 0)
LVTERR  0x000000fe active-hi edge                              Fixed  (vec 254)
LVTTHMR 0x00010000 active-hi edge  masked                      Fixed  (vec 0)
LVTT    0x000000ef active-hi edge                 one-shot     Fixed  (vec 239)
Timer   DCR=0x3 (divide by 16) initial_count = 61360
SPIV    0x000001ff APIC enabled, focus=off, spurious vec 255
ICR     0x000000fd physical edge de-assert no-shorthand
ICR2    0x00000001 cpu 1 (X2APIC ID)
ESR     0x00000000
ISR     (none)
IRR     239

APR 0x00 TPR 0x00 DFR 0x0f LDR 0x00 PPR 0x00

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas FÃ¤rber <afaerber@suse.de>
Message-Id: <1442927901-1084-7-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1f871d49

Sep 22, 2015

hmp: Restore "info pci" · abadcbc8

Paolo Bonzini authored 9 years ago


Dropped by commit da76ee76's
transition to hmp-commands-info.hx.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1442589509-10806-1-git-send-email-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

abadcbc8

Sep 16, 2015

monitor: added generation of documentation for hmp-commands-info.hx · 2cd8af2d

Pavel Butsykin authored 9 years ago


It will be easier if you need to add info-commands to edit
only hmp-commands-info.hx, before this had to edit monitor.c and
hmp-commands.hx.

From the build point of view all documentation is saved into
qemu-monitor-info.texi which from now on is used for all user
documentation building.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

2cd8af2d