hw/arm/xlnx-zynqmp: 'Or' the QSPI / QSPI DMA IRQs

'Or' the IRQs coming from the QSPI and QSPI DMA models. This is done for
avoiding the situation where one of the models incorrectly deasserts an
interrupt asserted from the other model (which will result in that the IRQ
is lost and will not reach guest SW).

Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220203151742.1457-1-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/xlnx-zynqmp.c

@@ -50,6 +50,7 @@
 #define LQSPI_ADDR          0xc0000000
 #define QSPI_IRQ            15
 #define QSPI_DMA_ADDR       0xff0f0800
+#define NUM_QSPI_IRQ_LINES  2
 
 #define DP_ADDR             0xfd4a0000
 #define DP_IRQ              113
@@ -362,6 +363,8 @@ static void xlnx_zynqmp_init(Object *obj)
     }
 
     object_initialize_child(obj, "qspi-dma", &s->qspi_dma, TYPE_XLNX_CSU_DMA);
+    object_initialize_child(obj, "qspi-irq-orgate",
+                            &s->qspi_irq_orgate, TYPE_OR_IRQ);
 }
 
 static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
@@ -709,6 +712,11 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
                            gic_spi[adma_ch_intr[i]]);
     }
 
+    object_property_set_int(OBJECT(&s->qspi_irq_orgate),
+                            "num-lines", NUM_QSPI_IRQ_LINES, &error_fatal);
+    qdev_realize(DEVICE(&s->qspi_irq_orgate), NULL, &error_fatal);
+    qdev_connect_gpio_out(DEVICE(&s->qspi_irq_orgate), 0, gic_spi[QSPI_IRQ]);
+
     if (!object_property_set_link(OBJECT(&s->qspi_dma), "dma",
                                   OBJECT(system_memory), errp)) {
         return;
@@ -718,7 +726,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     }
 
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi_dma), 0, QSPI_DMA_ADDR);
-    sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0, gic_spi[QSPI_IRQ]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0,
+                       qdev_get_gpio_in(DEVICE(&s->qspi_irq_orgate), 0));
 
     if (!object_property_set_link(OBJECT(&s->qspi), "stream-connected-dma",
                                   OBJECT(&s->qspi_dma), errp)) {
@@ -729,7 +738,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     }
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 0, QSPI_ADDR);
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 1, LQSPI_ADDR);
-    sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, gic_spi[QSPI_IRQ]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0,
+                       qdev_get_gpio_in(DEVICE(&s->qspi_irq_orgate), 1));
 
     for (i = 0; i < XLNX_ZYNQMP_NUM_QSPI_BUS; i++) {
         g_autofree gchar *bus_name = g_strdup_printf("qspi%d", i);

include/hw/arm/xlnx-zynqmp.h

@@ -38,6 +38,7 @@
 #include "hw/dma/xlnx_csu_dma.h"
 #include "hw/nvram/xlnx-bbram.h"
 #include "hw/nvram/xlnx-zynqmp-efuse.h"
+#include "hw/or-irq.h"
 
 #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp"
 OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
@@ -122,6 +123,7 @@ struct XlnxZynqMPState {
     XlnxZDMA gdma[XLNX_ZYNQMP_NUM_GDMA_CH];
     XlnxZDMA adma[XLNX_ZYNQMP_NUM_ADMA_CH];
     XlnxCSUDMA qspi_dma;
+    qemu_or_irq qspi_irq_orgate;
 
     char *boot_cpu;
     ARMCPU *boot_cpu_ptr;