hw: move char devices to hw/char/, configure via default-configs/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

default-configs/arm-softmmu.mak

@@ -57,6 +57,7 @@ CONFIG_MARVELL_88W8618=y
 CONFIG_OMAP=y
 CONFIG_BLIZZARD=y
 CONFIG_ONENAND=y
+CONFIG_IMX=y
 CONFIG_ZAURUS=y
 
 CONFIG_VERSATILE_PCI=y

default-configs/i386-softmmu.mak

@@ -34,3 +34,4 @@ CONFIG_MC146818RTC=y
 CONFIG_WDT_IB700=y
 CONFIG_PC_SYSFW=y
 CONFIG_XEN_I386=$(CONFIG_XEN)
+CONFIG_ISA_DEBUG=y

default-configs/lm32-softmmu.mak

 # Default configuration for lm32-softmmu
 
+CONFIG_LM32=y
 CONFIG_MILKYMIST=y
 CONFIG_FRAMEBUFFER=y
 CONFIG_PTIMER=y

default-configs/s390x-softmmu.mak

 CONFIG_VIRTIO=y
+CONFIG_SCLPCONSOLE=y

default-configs/sparc-softmmu.mak

@@ -11,3 +11,4 @@ CONFIG_PCNET_COMMON=y
 CONFIG_LANCE=y
 CONFIG_TCX=y
 CONFIG_CS4231=y
+CONFIG_GRLIB=y

default-configs/x86_64-softmmu.mak

@@ -34,3 +34,4 @@ CONFIG_MC146818RTC=y
 CONFIG_WDT_IB700=y
 CONFIG_PC_SYSFW=y
 CONFIG_XEN_I386=$(CONFIG_XEN)
+CONFIG_ISA_DEBUG=y

hw/arm/Makefile.objs

@@ -3,7 +3,7 @@ obj-y += arm_gic.o arm_gic_common.o
 obj-y += a9scu.o
 obj-y += realview_gic.o arm_sysctl.o arm11mpcore.o a9mpcore.o
 obj-y += exynos4210_gic.o exynos4210_combiner.o
-obj-y += exynos4210_uart.o exynos4210_pwm.o
+obj-y += exynos4210_pwm.o
 obj-y += exynos4210_pmu.o exynos4210_mct.o
 obj-y += exynos4210_rtc.o
 obj-y += arm_mptimer.o a15mpcore.o
@@ -12,14 +12,14 @@ obj-y += pxa2xx_timer.o pxa2xx_dma.o
 obj-y += pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
 obj-y += zaurus.o
 obj-y += omap_dma.o omap_clk.o omap_mmc.o \
-                omap_gpio.o omap_intc.o omap_uart.o
+                omap_gpio.o omap_intc.o
 obj-y += soc_dma.o omap_gptimer.o omap_synctimer.o \
                 omap_gpmc.o omap_sdrc.o omap_tap.o omap_l4.o
 obj-y += tsc210x.o
 obj-y += cbus.o tusb6010.o
 obj-y += mst_fpga.o
 obj-y += strongarm.o
-obj-y += imx_serial.o imx_ccm.o imx_timer.o imx_avic.o
+obj-y += imx_ccm.o imx_timer.o imx_avic.o
 obj-$(CONFIG_KVM) += kvm/arm_gic.o
 
 obj-y := $(addprefix ../,$(obj-y))

hw/char/Makefile.objs

@@ -9,4 +9,19 @@ common-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
 common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o
 common-obj-$(CONFIG_CADENCE) += cadence_uart.o
 
+obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o
+obj-$(CONFIG_COLDFIRE) += mcf_uart.o
+obj-$(CONFIG_OMAP) += omap_uart.o
+obj-$(CONFIG_SH4) += sh_serial.o
+obj-$(CONFIG_PSERIES) += spapr_vty.o
+
+common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o
+common-obj-$(CONFIG_ISA_DEBUG) += debugcon.o
+common-obj-$(CONFIG_GRLIB) += grlib_apbuart.o
+common-obj-$(CONFIG_IMX) += imx_serial.o
+common-obj-$(CONFIG_LM32) += lm32_juart.o
+common-obj-$(CONFIG_LM32) += lm32_uart.o
+common-obj-$(CONFIG_MILKYMIST) += milkymist-uart.o
+common-obj-$(CONFIG_SCLPCONSOLE) += sclpconsole.o
+
 obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o

hw/etraxfs_ser.c → hw/char/etraxfs_ser.c

@@ -78,7 +78,6 @@ static uint64_t
 ser_read(void *opaque, hwaddr addr, unsigned int size)
 {
     struct etrax_serial *s = opaque;
-    D(CPUCRISState *env = s->env);
     uint32_t r = 0;
 
     addr >>= 2;
@@ -116,7 +115,6 @@ ser_write(void *opaque, hwaddr addr,
     struct etrax_serial *s = opaque;
     uint32_t value = val64;
     unsigned char ch = val64;
-    D(CPUCRISState *env = s->env);
 
     D(qemu_log("%s " TARGET_FMT_plx "=%x\n",  __func__, addr, value));
     addr >>= 2;

hw/s390x/sclpconsole.c → hw/char/sclpconsole.c

@@ -234,7 +234,7 @@ static int write_event_data(SCLPEvent *event, EventBufferHeader *evt_buf_hdr)
     return rc;
 }
 
-static void trigger_ascii_console_data(void *env, int n, int level)
+static void trigger_ascii_console_data(void *opaque, int n, int level)
 {
     sclp_service_interrupt(0);
 }