target/hppa: Implement tlb_fill

However since HPPA has a software-managed TLB, and the relevant
TLB manipulation instructions are not implemented, this does not
actually do anything.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/hppa/cpu.h

@@ -165,6 +165,22 @@ typedef int64_t  target_sreg;
 #define TREG_FMT_ld   "%"PRId64
 #endif
 
+typedef struct {
+    uint64_t va_b;
+    uint64_t va_e;
+    target_ureg pa;
+    unsigned u : 1;
+    unsigned t : 1;
+    unsigned d : 1;
+    unsigned b : 1;
+    unsigned page_size : 4;
+    unsigned ar_type : 3;
+    unsigned ar_pl1 : 2;
+    unsigned ar_pl2 : 2;
+    unsigned entry_valid : 1;
+    unsigned access_id : 16;
+} hppa_tlb_entry;
+
 struct CPUHPPAState {
     target_ureg gr[32];
     uint64_t fr[32];
@@ -198,6 +214,12 @@ struct CPUHPPAState {
 
     /* Those resources are used only in QEMU core */
     CPU_COMMON
+
+    /* ??? The number of entries isn't specified by the architecture.  */
+    /* ??? Implement a unified itlb/dtlb for the moment.  */
+    /* ??? We should use a more intelligent data structure.  */
+    hppa_tlb_entry tlb[256];
+    uint32_t tlb_last;
 };
 
 /**
@@ -307,13 +329,18 @@ void cpu_hppa_loaded_fr0(CPUHPPAState *env);
 #define cpu_signal_handler cpu_hppa_signal_handler
 
 int cpu_hppa_signal_handler(int host_signum, void *pinfo, void *puc);
-int hppa_cpu_handle_mmu_fault(CPUState *cpu, vaddr address, int size,
-                              int rw, int midx);
 hwaddr hppa_cpu_get_phys_page_debug(CPUState *cs, vaddr addr);
 int hppa_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
 int hppa_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
 void hppa_cpu_do_interrupt(CPUState *cpu);
 bool hppa_cpu_exec_interrupt(CPUState *cpu, int int_req);
 void hppa_cpu_dump_state(CPUState *cs, FILE *f, fprintf_function, int);
+#ifdef CONFIG_USER_ONLY
+int hppa_cpu_handle_mmu_fault(CPUState *cpu, vaddr address, int size,
+                              int rw, int midx);
+#else
+int hppa_get_physical_address(CPUHPPAState *env, vaddr addr, int mmu_idx,
+                              int type, hwaddr *pphys, int *pprot);
+#endif
 
 #endif /* HPPA_CPU_H */

target/hppa/int_helper.c

@@ -79,12 +79,24 @@ void hppa_cpu_do_interrupt(CPUState *cs)
             {
                 /* Avoid reading directly from the virtual address, lest we
                    raise another exception from some sort of TLB issue.  */
+                /* ??? An alternate fool-proof method would be to store the
+                   instruction data into the unwind info.  That's probably
+                   a bit too much in the way of extra storage required.  */
                 vaddr vaddr;
                 hwaddr paddr;
 
                 paddr = vaddr = iaoq_f & -4;
                 if (old_psw & PSW_C) {
-                    vaddr = hppa_form_gva_psw(old_psw, iasq_f, iaoq_f & -4);
+                    int prot, t;
+
+                    vaddr = hppa_form_gva_psw(old_psw, iasq_f, vaddr);
+                    t = hppa_get_physical_address(env, vaddr, MMU_KERNEL_IDX,
+                                                  0, &paddr, &prot);
+                    if (t >= 0) {
+                        /* We can't re-load the instruction.  */
+                        env->cr[CR_IIR] = 0;
+                        break;
+                    }
                 }
                 env->cr[CR_IIR] = ldl_phys(cs->as, paddr);
             }

target/hppa/mem_helper.c

@@ -36,18 +36,166 @@ int hppa_cpu_handle_mmu_fault(CPUState *cs, vaddr address,
     return 1;
 }
 #else
+static hppa_tlb_entry *hppa_find_tlb(CPUHPPAState *env, vaddr addr)
+{
+    int i;
+
+    for (i = 0; i < ARRAY_SIZE(env->tlb); ++i) {
+        hppa_tlb_entry *ent = &env->tlb[i];
+        if (ent->va_b <= addr && addr <= ent->va_e && ent->entry_valid) {
+            return ent;
+        }
+    }
+    return NULL;
+}
+
+int hppa_get_physical_address(CPUHPPAState *env, vaddr addr, int mmu_idx,
+                              int type, hwaddr *pphys, int *pprot)
+{
+    hwaddr phys;
+    int prot, r_prot, w_prot, x_prot;
+    hppa_tlb_entry *ent;
+    int ret = -1;
+
+    /* Virtual translation disabled.  Direct map virtual to physical.  */
+    if (mmu_idx == MMU_PHYS_IDX) {
+        phys = addr;
+        prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
+        goto egress;
+    }
+
+    /* Find a valid tlb entry that matches the virtual address.  */
+    ent = hppa_find_tlb(env, addr);
+    if (ent == NULL) {
+        phys = 0;
+        prot = 0;
+        ret = (type & PAGE_EXEC ? EXCP_ITLB_MISS : EXCP_DTLB_MISS);
+        goto egress;
+    }
+
+    /* We now know the physical address.  */
+    phys = ent->pa + (addr & ~TARGET_PAGE_MASK);
+
+    /* Map TLB access_rights field to QEMU protection.  */
+    r_prot = (mmu_idx <= ent->ar_pl1) * PAGE_READ;
+    w_prot = (mmu_idx <= ent->ar_pl2) * PAGE_WRITE;
+    x_prot = (ent->ar_pl2 <= mmu_idx && mmu_idx <= ent->ar_pl1) * PAGE_EXEC;
+    switch (ent->ar_type) {
+    case 0: /* read-only: data page */
+        prot = r_prot;
+        break;
+    case 1: /* read/write: dynamic data page */
+        prot = r_prot | w_prot;
+        break;
+    case 2: /* read/execute: normal code page */
+        prot = r_prot | x_prot;
+        break;
+    case 3: /* read/write/execute: dynamic code page */
+        prot = r_prot | w_prot | x_prot;
+        break;
+    default: /* execute: promote to privilege level type & 3 */
+        prot = x_prot;
+    }
+
+    /* ??? Check PSW_P and ent->access_prot.  This can remove PAGE_WRITE.  */
+
+    /* No guest access type indicates a non-architectural access from
+       within QEMU.  Bypass checks for access, D, B and T bits.  */
+    if (type == 0) {
+        goto egress;
+    }
+
+    if (unlikely(!(prot & type))) {
+        /* The access isn't allowed -- Inst/Data Memory Protection Fault.  */
+        ret = (type & PAGE_EXEC ? EXCP_IMP : EXCP_DMP);
+        goto egress;
+    }
+
+    /* In reverse priority order, check for conditions which raise faults.
+       As we go, remove PROT bits that cover the condition we want to check.
+       In this way, the resulting PROT will force a re-check of the
+       architectural TLB entry for the next access.  */
+    if (unlikely(!ent->d)) {
+        if (type & PAGE_WRITE) {
+            /* The D bit is not set -- TLB Dirty Bit Fault.  */
+            ret = EXCP_TLB_DIRTY;
+        }
+        prot &= PAGE_READ | PAGE_EXEC;
+    }
+    if (unlikely(ent->b)) {
+        if (type & PAGE_WRITE) {
+            /* The B bit is set -- Data Memory Break Fault.  */
+            ret = EXCP_DMB;
+        }
+        prot &= PAGE_READ | PAGE_EXEC;
+    }
+    if (unlikely(ent->t)) {
+        if (!(type & PAGE_EXEC)) {
+            /* The T bit is set -- Page Reference Fault.  */
+            ret = EXCP_PAGE_REF;
+        }
+        prot &= PAGE_EXEC;
+    }
+
+ egress:
+    *pphys = phys;
+    *pprot = prot;
+    return ret;
+}
+
 hwaddr hppa_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
 {
-    /* Stub */
-    return addr;
+    HPPACPU *cpu = HPPA_CPU(cs);
+    hwaddr phys;
+    int prot, excp;
+
+    /* If the (data) mmu is disabled, bypass translation.  */
+    /* ??? We really ought to know if the code mmu is disabled too,
+       in order to get the correct debugging dumps.  */
+    if (!(cpu->env.psw & PSW_D)) {
+        return addr;
+    }
+
+    excp = hppa_get_physical_address(&cpu->env, addr, MMU_KERNEL_IDX, 0,
+                                     &phys, &prot);
+
+    /* Since we're translating for debugging, the only error that is a
+       hard error is no translation at all.  Otherwise, while a real cpu
+       access might not have permission, the debugger does.  */
+    return excp == EXCP_DTLB_MISS ? -1 : phys;
 }
 
-void tlb_fill(CPUState *cs, target_ulong addr, MMUAccessType type,
-              int mmu_idx, uintptr_t retaddr)
+void tlb_fill(CPUState *cs, target_ulong addr, int size,
+              MMUAccessType type, int mmu_idx, uintptr_t retaddr)
 {
-    /* Stub */
-    int prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC;
-    hwaddr phys = addr;
+    HPPACPU *cpu = HPPA_CPU(cs);
+    int prot, excp, a_prot;
+    hwaddr phys;
+
+    switch (type) {
+    case MMU_INST_FETCH:
+        a_prot = PAGE_EXEC;
+        break;
+    case MMU_DATA_STORE:
+        a_prot = PAGE_WRITE;
+        break;
+    default:
+        a_prot = PAGE_READ;
+        break;
+    }
+
+    excp = hppa_get_physical_address(&cpu->env, addr, mmu_idx,
+                                     a_prot, &phys, &prot);
+    if (unlikely(excp >= 0)) {
+        /* Failure.  Raise the indicated exception.  */
+        cs->exception_index = excp;
+        if (cpu->env.psw & PSW_Q) {
+            /* ??? Needs tweaking for hppa64.  */
+            cpu->env.cr[CR_IOR] = addr;
+            cpu->env.cr[CR_ISR] = addr >> 32;
+        }
+        cpu_loop_exit_restore(cs, retaddr);
+    }
 
     /* Success!  Store the translation into the QEMU TLB.  */
     tlb_set_page(cs, addr & TARGET_PAGE_MASK, phys & TARGET_PAGE_MASK,