pckbd: remove duplicated keyboard and mouse defines

In 2005 the author of commit daa57963 "PS2 mouse and keyboard
separation (Paul Brook)" and 0e43e99c "PS2 mouse and keyboard
separation (Paul Brook)" separated the PS/2 controller code and
the PS/2 keyboard and mouse code. It seems he forgot to remove
a few defines. Remove them now.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-11-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

hw/input/pckbd.c

@@ -62,21 +62,6 @@
 #define KBD_CCMD_RESET          0xFE    /* Pulse bit 0 of the output port P2 = CPU reset. */
 #define KBD_CCMD_NO_OP          0xFF    /* Pulse no bits of the output port P2. */
 
-/* Keyboard Commands */
-#define KBD_CMD_SET_LEDS	0xED	/* Set keyboard leds */
-#define KBD_CMD_ECHO     	0xEE
-#define KBD_CMD_GET_ID 	        0xF2	/* get keyboard ID */
-#define KBD_CMD_SET_RATE	0xF3	/* Set typematic rate */
-#define KBD_CMD_ENABLE		0xF4	/* Enable scanning */
-#define KBD_CMD_RESET_DISABLE	0xF5	/* reset and disable scanning */
-#define KBD_CMD_RESET_ENABLE   	0xF6    /* reset and enable scanning */
-#define KBD_CMD_RESET		0xFF	/* Reset */
-
-/* Keyboard Replies */
-#define KBD_REPLY_POR		0xAA	/* Power on reset */
-#define KBD_REPLY_ACK		0xFA	/* Command ACK */
-#define KBD_REPLY_RESEND	0xFE	/* Command NACK, send the cmd again */
-
 /* Status Register Bits */
 #define KBD_STAT_OBF 		0x01	/* Keyboard output buffer full */
 #define KBD_STAT_IBF 		0x02	/* Keyboard input buffer full */
@@ -109,28 +94,6 @@
  */
 #define KBD_OUT_ONES            0xcc
 
-/* Mouse Commands */
-#define AUX_SET_SCALE11		0xE6	/* Set 1:1 scaling */
-#define AUX_SET_SCALE21		0xE7	/* Set 2:1 scaling */
-#define AUX_SET_RES		0xE8	/* Set resolution */
-#define AUX_GET_SCALE		0xE9	/* Get scaling factor */
-#define AUX_SET_STREAM		0xEA	/* Set stream mode */
-#define AUX_POLL		0xEB	/* Poll */
-#define AUX_RESET_WRAP		0xEC	/* Reset wrap mode */
-#define AUX_SET_WRAP		0xEE	/* Set wrap mode */
-#define AUX_SET_REMOTE		0xF0	/* Set remote mode */
-#define AUX_GET_TYPE		0xF2	/* Get type */
-#define AUX_SET_SAMPLE		0xF3	/* Set sample rate */
-#define AUX_ENABLE_DEV		0xF4	/* Enable aux device */
-#define AUX_DISABLE_DEV		0xF5	/* Disable aux device */
-#define AUX_SET_DEFAULT		0xF6
-#define AUX_RESET		0xFF	/* Reset aux device */
-#define AUX_ACK			0xFA	/* Command byte ACK. */
-
-#define MOUSE_STATUS_REMOTE     0x40
-#define MOUSE_STATUS_ENABLED    0x20
-#define MOUSE_STATUS_SCALE21    0x10
-
 #define KBD_PENDING_KBD_COMPAT  0x01
 #define KBD_PENDING_AUX_COMPAT  0x02
 #define KBD_PENDING_CTRL_KBD    0x04