Skip to content
Snippets Groups Projects
Select Git revision
  • feature/libtcg-rebase default protected
1 result
Compare
user avatar
aio-posix: split poll check from ready handler
Stefan Hajnoczi authored 
Adaptive polling measures the execution time of the polling check plus
handlers called when a polled event becomes ready. Handlers can take a
significant amount of time, making it look like polling was running for
a long time when in fact the event handler was running for a long time.

For example, on Linux the io_submit(2) syscall invoked when a virtio-blk
device's virtqueue becomes ready can take 10s of microseconds. This
can exceed the default polling interval (32 microseconds) and cause
adaptive polling to stop polling.

By excluding the handler's execution time from the polling check we make
the adaptive polling calculation more accurate. As a result, the event
loop now stays in polling mode where previously it would have fallen
back to file descriptor monitoring.

The following data was collected with virtio-blk num-queues=2
event_idx=off using an IOThread. Before:

168k IOPS, IOThread syscalls:

  9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0)    = 16
  9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8)                         = 8
  9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8)                         = 8
  9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3
  9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512)                        = 8
  9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512)                        = 8
  9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512)                        = 8
  9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0)    = 32

174k IOPS (+3.6%), IOThread syscalls:

  9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0)    = 32
  9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8)                         = 8
  9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8)                         = 8
  9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50)    = 32

Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because
the IOThread stays in polling mode instead of falling back to file
descriptor monitoring.

As usual, polling is not implemented on Windows so this patch ignores
the new io_poll_read() callback in aio-win32.c.

Signed-off-by: default avatarStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: default avatarStefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-2-stefanha@redhat.com

[Fixed up aio_set_event_notifier() calls in
tests/unit/test-fdmon-epoll.c added after this series was queued.
--Stefan]

Signed-off-by: default avatarStefan Hajnoczi <stefanha@redhat.com>
826cc324
History
user avatar 826cc324
History
Name Last commit Last update
.github/workflows
.gitlab-ci.d
.gitlab/issue_templates
accel
audio
authz
backends
block
bsd-user
chardev
common-user
configs
contrib
crypto
disas
docs
dump
ebpf
fpu
fsdev
gdb-xml
hw
include
io
libdecnumber
linux-headers
linux-user
migration
monitor
nbd
net
pc-bios
plugins
po
python
qapi
qga
qobject
qom
replay
roms
scripts
scsi
semihosting
softmmu
storage-daemon
stubs
subprojects/libvhost-user
target
tcg
tests
tools
trace
ui
util
.cirrus.yml
.dir-locals.el
.editorconfig
.exrc
.gdbinit
.gitattributes
.gitignore
.gitlab-ci.yml
.gitmodules
.gitpublish
.mailmap
.patchew.yml
.readthedocs.yml
.travis.yml
COPYING
COPYING.LIB
Kconfig
Kconfig.host
LICENSE
MAINTAINERS
Makefile
README.rst
VERSION
block.c
blockdev-nbd.c
blockdev.c
blockjob.c
configure
cpu.c
cpus-common.c
disas.c
gdbstub.c
gitdm.config
hmp-commands-info.hx
hmp-commands.hx
iothread.c
job-qmp.c
job.c
memory_ldst.c.inc
meson.build
meson_options.txt
module-common.c
os-posix.c
os-win32.c
page-vary-common.c
README.rst

QEMU README

QEMU is a generic and open source machine & userspace emulator and virtualizer.

QEMU is capable of emulating a complete machine in software without any need for hardware virtualization support. By using dynamic translation, it achieves very good performance. QEMU can also integrate with the Xen and KVM hypervisors to provide emulated hardware while allowing the hypervisor to manage the CPU. With hypervisor support, QEMU can achieve near native performance for CPUs. When QEMU emulates CPUs directly it is capable of running operating systems made for one machine (e.g. an ARMv7 board) on a different machine (e.g. an x86_64 PC board).

QEMU is also capable of providing userspace API virtualization for Linux and BSD kernel interfaces. This allows binaries compiled against one architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a different architecture ABI (e.g. the Linux x86_64 ABI). This does not involve any hardware emulation, simply CPU and syscall emulation.

QEMU aims to fit into a variety of use cases. It can be invoked directly by users wishing to have full control over its behaviour and settings. It also aims to facilitate integration into higher level management layers, by providing a stable command line interface and monitor API. It is commonly invoked indirectly via the libvirt library when using open source applications such as oVirt, OpenStack and virt-manager.

QEMU as a whole is released under the GNU General Public License, version 2. For full licensing details, consult the LICENSE file.

Documentation

Documentation can be found hosted online at https://www.qemu.org/documentation/. The documentation for the current development version that is available at https://www.qemu.org/docs/master/ is generated from the docs/ folder in the source tree, and is built by Sphinx <https://www.sphinx-doc.org/en/master/>_.

Building

QEMU is multi-platform software intended to be buildable on all modern Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety of other UNIX targets. The simple steps to build QEMU are:

mkdir build
cd build
../configure
make

Additional information can also be found online via the QEMU website:

Submitting patches

The QEMU source code is maintained under the GIT version control system.

git clone https://gitlab.com/qemu-project/qemu.git

When submitting patches, one common approach is to use 'git format-patch' and/or 'git send-email' to format & send the mail to the qemu-devel@nongnu.org mailing list. All patches submitted must contain a 'Signed-off-by' line from the author. Patches should follow the guidelines set out in the style section <https://www.qemu.org/docs/master/devel/style.html> of the Developers Guide.

Additional information on submitting patches can be found online via the QEMU website

The QEMU website is also maintained under source control.

git clone https://gitlab.com/qemu-project/qemu-web.git

A 'git-publish' utility was created to make above process less cumbersome, and is highly recommended for making regular contributions, or even just for sending consecutive patch series revisions. It also requires a working 'git send-email' setup, and by default doesn't automate everything, so you may want to go through the above steps manually for once.

For installation instructions, please go to

The workflow with 'git-publish' is:

$ git checkout master -b my-feature
$ # work on new commits, add your 'Signed-off-by' lines to each
$ git publish

Your patch series will be sent and tagged as my-feature-v1 if you need to refer back to it in the future.

Sending v2:

$ git checkout my-feature # same topic branch
$ # making changes to the commits (using 'git rebase', for example)
$ git publish

Your patch series will be sent with 'v2' tag in the subject and the git tip will be tagged as my-feature-v2.

Bug reporting

The QEMU project uses GitLab issues to track bugs. Bugs found when running code built from QEMU git or upstream released sources should be reported via:

If using QEMU via an operating system vendor pre-built binary package, it is preferable to report bugs to the vendor's own bug tracker first. If the bug is also known to affect latest upstream code, it can also be reported via GitLab.

For additional information on bug reporting consult:

ChangeLog

For version history and release notes, please visit https://wiki.qemu.org/ChangeLog/ or look at the git history for more detailed information.

Contact

The QEMU community can be contacted in a number of ways, with the two main methods being email and IRC

Information on additional methods of contacting the community can be found online via the QEMU website: